Operator's Manual
Key Features
- Protects precision equipment from facility water contaminants
- Quiet, energy-efficient liquid-to-liquid heat removal
- Displays temperature and pressure or flow rate information
- Built-in temperature and low flow alarms
Related Fluids & Accessories
Common Specifications
Working Temperature Range °F |
Facility water +20° to 140° |
---|---|
Working Temperature Range °C |
Facility water +10° to 60° |
Reservoir Capacity (gallons) |
1.11 |
Reservoir Capacity (liters) |
4.2 |
Reservoir Cover |
Screw-on Cap |
Cleanable Fluid Filter |
Yes |
Temperature Stability °F |
±0.8° |
Temperature Stability °C |
±0.4° |
Pump Type |
Turbine |
Pump Speed |
Constant, Single Speed |
Process Connections |
1/2" (F) NPT |
External Temperature Control Capability |
Optional |
Over-Temperature Protection / Failsafe Heater Control |
Yes |
Reservoir Drain |
Yes |
Maximum Ambient Temperature °F |
95° |
Maximum Ambient Temperature °C |
35° |
Overall Dimensions (L x W x H) (inches) |
27.6 x 14.5 x 22.6 in |
Overall Dimensions (L x W x H) (cm) |
70.2 x 36.8 x 57.5 cm |
Shipping Weight (pounds) |
175.0 |
Shipping Weight (kilograms) |
79.5 |
Catalog Page Number |
108 |
60 Hz Only
Part Number |
4150T21A130D |
---|---|
Maximum Pressure (psi) |
100.0 |
Maximum Pressure (bar) | |
Maximum Pressure Flow Rate (gpm) |
3.50 |
Maximum Pressure Flow Rate (l/min) |
13.2 |
Cooling Capacity (W/BTU) |
15000 / 52855 based on 15°C ΔT 10000 / 34100 based on 10°C ΔT 4500 / 5345 based on 5°C ΔT ΔT = Process water temperature - facility water temperature |
Included Hardware |
Two sets of Inlet/Outlet Adapters: ½ inch male NPT, 5/8 inch male NPT |
Electrical Requirements (VAC/Hz/Ph/A) |
208-230/60/1/3 |
Regulatory Approvals |
TUV |
50 Hz Only
Part Number |
4150T21A130E |
---|---|
Maximum Pressure (psi) |
83.0 |
Maximum Pressure (bar) | |
Maximum Pressure Flow Rate (gpm) |
2.90 |
Maximum Pressure Flow Rate (l/min) |
11.0 |
Cooling Capacity (W/BTU) |
15000 / 52855 based on 15°C ΔT 10000 / 34100 based on 10°C ΔT 4500 / 5345 based on 5°C ΔT ΔT = Process water temperature - facility water temperature |
Included Hardware |
Two sets of Inlet/Outlet Adapters: ½ inch male NPT, 5/8 inch male NPT |
Electrical Requirements (VAC/Hz/Ph/A) |
240/50/1/3 |
Regulatory Approvals |
CE |